|
|
 |
 (Patent Pending) |
| APPLICATION GUIDE
Back to clear coats Section |
|
| |
| Mixing Ratio (4:1) |
| Mix 4 parts SC1230 to 1 part H-222. |
| Application |
| Apply 2-3 wet coats at 25 psi allowing 10-15 minute flash between coats. Keep spray gun 6-10 inches away from the substrate to avoid problems associated with air entrapment. |
| Dry times at 77° F |
Dust Free in 20 minutes
Tack Free in 30 minutes |
| Force Drying |
Flash time @ 77° F - 20 Minutes
Bake Time @140° F - 45 Minutes
Allow 1 - 2 hours before wet sanding and buffing. |
| |
|
|
|
|
| |
|
In order to view our Technical Data Sheets and Material Safety Data Sheets, you will need to have Adobe Reader, which is free, easy to use, and can be downloaded by clicking  on the link below. |
*NOTE: Pop-Up Blockers MUST be Turned off to view these pages |
|
| |
|
|
