 |
| |
APPLICATION GUIDE
Back to Chrome Paints Section |
 |
| MultiChrome |
MultiChrome can be applied with almost any type of spray equipment from airbrushes to full size HVLP guns. MultiChrome comes ready to spray meaning no reducers or hardeners, just pour it in your gun and spray , when you're finished simply pour it back into it's container to use later.
 MultiChrome can be used on any surface you can paint such as metals, plastics, wood, foams etc. From trim pieces and logos to full blown custom paint jobs the possibilities are endless!
|
MultiChrome will create a mirror finish as long as your surface is as smooth as glass and a prismatic color burst when viewed from different angles.
Step 1. - Apply Alsa Jet Black Stylin Basecoat ASB-13.
Step 2. - Allow to dry for 30-60 minutes before applying the recommended Alsa Speed Clear SC-1230.
Step 3. - Apply 2 Dust coats of MultiChrome at 25 PSI with an Iwata LPH50 (or equivalent gun) with a 1.0 Fluid tip, apply one coat after the other then allow the MultiChrome to sit over night in a clean area at 77° F.
Step 4. - Wipe and remove any excess dust / operspray with a soft lint-free cloth.
Step 4. - Clear with the recommended Alsa Speed Clear SC-1230. |
| |
|
|
In order to view our Technical Data Sheets and Material Safety Data Sheets, you will need to have Adobe Reader, which is free, easy to use, and can be downloaded by clicking  on the link below. |
*NOTE: Pop-Up Blockers MUST be Turned off to view these pages |
|
| |
| Due to the inability of Alsa to anticipate
or control conditions whereby Alsa products will be employed,
Alsa does not represent or guarantee that any Alsa product
is fit for a particular purpose. Alsa products should be
tested by users to determine suitability for a particular
purpose. Alsa disclaims responsibility for claims and damages
beyond replacement of any defective Alsa product. There
are no warranties which extend beyond the description on
the face here of. |
| |
