 |
|
 |
 Alsa's Epoxy Primer is a two-component, non-isocyanate primer with superior corrosion resistance and excellent adhesion to metal applications. Epoxy Primer is currently available in gray. It is intended for use as a metal treatment or a sealer. Alsa's Epoxy Primer can be applied over cleaned aluminum, galvanized steel, stainless steel, or over appropriately sanded blasted carbon steel, sanded fiberglass, and sanded OEM e-coat primers. (Learn more) |
| |
 |
|
Quantity |
Item No. |
Price |
|
1 Quart |
AEP-3027Q |
$45.00 |
 |
1 Gallon |
AEP-3027G |
$150.00 |
|
 |
|
1/2 Pint |
AEPA-30278 |
$29.00 |
|
1 Quart |
AEPA-3027Q |
$49.00 |
|
| Learn more |
MIX AEP-3027 with AEPA-3027 (4:1) |
|
—————————————————————————— |
|
| |
|
| |
 |
|
Quantity |
Item No. |
Price |
|
1 Quart |
SC1230Q |
$85.00 |
|
1 Gallon |
SC1230G |
$179.00 |
|
 |
|
1/2 Pint |
H-2228 |
$25.00 |
|
1 Quart |
H-222Q |
$60.00 |
|
| Learn more |
Mix SC1230 with H-222 at a ratio of (4:1) |
|
—————————————————————————— |
|
| |
 introduces you to the dynamic world of Alsa's new chrome paint line. These paints are the latest craze for custom painting onto metal, vinyl, plastic, wood and practically any surface.
|
You will learn: |
-
How to produce the reflective effect
-
How to apply Ghost Chrome
-
How to apply MirraChrome
-
How to apply Crystal F/X
-
Use of reducers
-
Crazer
-
How to use an air grinder for special effects
-
Drying times
|
-
Peeling techniques
-
Correcting mistakes
-
Surface prep
-
Air pressure
-
Stencil for background effects: skulls, gears and more
-
Spraying with Alsa candies
-
Use of a heat gun for crystallizing
-
And more!
|
|
|
—————————————————————————— |
|
| |
|
| |
Epoxy Primer (AEP-3027) is formulated for excellent corrosion and water resistance with tenacious adhesion over a variety of substrates. |
—————————————————————————— |
|
| |
|
| |
How to apply Epoxy Primer
STEP 1. - Prepare and prime the surface as you would any normal paint job.
STEP 2. - Mix required amount of Epoxy Primer with Epoxy Primer Activator at a ratio of (4:1).
STEP 3. - Apply 2 wet coats to ensure uniform coverage.
STEP 4. - Let flash off before applying your final clear or taping off graphics.
STEP 5. - Topcoat with a poly-urethane clearcoat as you would with any other paint job. |
| |
| Click here to view the MSDS/TDS |
| |
| ** Warning: MirraChrome paint
is highly flammable. Please take care in storing and applying
it away from open flame or high heats. It is also poisonous
if ingested, so please store it away from children. |
—————————————————————————— |
| |
| Due to the inability of Alsa to anticipate or control conditions whereby Alsa products will be employed, Alsa does not represent or guarantee that any Alsa product is fit for a particular purpose. Alsa products should be tested by users to determine suitability for a particular purpose. Alsa disclaims responsibility for claims and damages beyond replacement of any defective Alsa product. There are no warranties which extend beyond the description on the face here of. |
|
