 |
 Patent Pending |
| FREQUENTLY ASKED QUESTIONS |
 |
| Q. What is the Alsa-Max PURI-027? |
A. The Alsa-Max is a fully programmable ionization controller. This device will ionically charge your supplied air. By simply connecting it in-line to your air system you will see instant results.
|
| Q. Does it require electricity? |
A. Yes, the Alsa-Max come supplied with a power cord and must be plugged into a 110V socket outside your paint booth. (NOTE: The Alsa-Max PURI-027 CANNOT be mounted on the inside of your paint booth).
|
| Q. Does it require maintenance? |
| A. By insuring you have clean (oil free, dry) air going to your Alsa-Max you can expect years of trouble free operation. There are no filters to change or maintenance required. |
| Q. How do I program my Alsa-Max? |
| A.
Your Alsa-Max come to you preprogrammed for optimal use under general conditions. Advanced programming (rate of sweep, intensity, voltage) can be controlled via connection to a PC or Laptop (additional software required). |
| Q. Do I have to use a computer to control my Alsa-Max? |
| A. No, inside the Alsa-Max is also an analog control knob giving you the ability to change the voltage intensity and ionic efficiency. |
| Q. Do I still need an air compressor? |
| A. Yes, your Alsa-Max will not supply air. An air compressor is still required. (NOTE: For best results your Alsa-Max should be used in combination with and Air Dryer and Moisture/Oil filter.) |
| Q. What type of airhose and size is recommended for use with AlsaMax? |
| A. Although a longer airhose can be used we recommend using a rubber airhose that is no more then 30 feet long for best results. |
| Q. How much PSI can the AlsaMax handle? |
| A. The AlsaMax pressure inlet can handle up to 180 PSI. |
| |
back to top |
