Contact Us Toll Free: (800) 999-4120 | email: info@alsacorp.com


Alsa Sample Packs


Scroll Down

for more product info









Keep scrolling









Keep scrolling









Keep scrolling









Keep scrolling









Keep scrolling









Keep scrolling











METALLIC Peel Off Paint


Metallic Peel Off Paints are paints that can be removed whenever
you want to change the color or finish of your car.
These Metallics offer the real luster of Metallic automotive paint.
It is the latest DIY (Do It Yourself) product from Alsa!

Can be brushed, rolled, or sprayed on almost any surface.
And this stuff peels off just like car wrap film, but easier!
It is very similar to Plasti Dip, however, our product is non-toxic,
and it is waster base safe!


SPECIAL NOTE: Peel Off Paint WILL NOT DRY PROPERLY BELOW 70°F
We recommend a temperature above 70° F
Can not be removed in cold. It needs at least 70° F to remove.

SPRAY CANS: We suggest that you use the entire contents of a can
once it is open. Apply spray using a continuous motion when
possible. Stop and go spraying will create dribbling at the tip.
Be sure to wipe the tip well after each application.

Available in 13 Metallic Colors

Metallic Peel Off Paints Color Swatches

Looking for that one perfect shade?
Use our Candy Concentrates; with thousands of color combinations,
and you’re certain to create that special custom color.


Custom Coupe with Metallic Paint and Candy Paint

Want a High Gloss finish? Add our Famous Speed Clear 2K.
And when you get tired of the colors, strip off the Peel Off Paint,
and create new color combinations!


2013 Mecerdes E-Class with Nevada Silver

New 2013 Mercedes-Benz E-Class Covered
with Nevada Silver Peel Off Paint.



Watch as Jessica Hewitt of San Antonio Detail
applies Alsa Peel Off Paint to her wheels,
and see how easy it is to remove.


It is not possible to get a true metallic look
with vinyl wrap. Can’t be! That is vinyl.
But ours is real metallic paint.



Examples of what you can accomplish with our Metallic Peel Off Paints.


California Gold Mitsuibishi

Mask your design, paint it on, then strip it off when you want a new one.


Shamrock Green Motorcycle

Or... purchase your favorite stencil,
choose your color, and start painting!


California Gold Flames

Metallic Peel Off Paints are completely Non-Toxic, and Water Base Safe!
Can be applied almost anywhere, no need for a paint booth.
And our Peel Off Paint will not harm your car’s finish like Plasti Dip.


Camero with Deep Blue Metallic

Cover an entire car in One Day, then add our
Famous Speed Clear 2K for a High Gloss finish.


Truck with Radical Red Metallic

You cannot find this in a vinyl car wrap, or any other spray-on wrap.
Our Metallic Peel Off Paints offer the real luster of
Metallic automotive paint.



Dealer and Distributor Discounts
are Available


Standard Colors Available


Retail Price $199.00 per Gallon


SPECIAL NOTE: Peel Off Paint WILL NOT DRY PROPERLY BELOW 70°F
We recommend a temperature above 70° F
Can not be removed in cold. It needs at least 70° F to remove.

Metallic Peel Off Paint Color Swatchesbuynow$199.00 − MPW-G
(One Gallon)

buynow$69.00 − MPW-Q
(One Quart)

To place an order, click the "Buy Now" button. You will be taken to the Shopping Cart page where you can select your color, and input the number of Gallons you wish to purchase.


A small car will use approximately two gallons, and a medium to large sedan willl use 3 to 4 gallons to cover completely.


For gloss or special effects, please use our Killer Cans, and topcoats.


For Custom Mixed Colors,
please contact our sales department.
Phone: 800-999-4120 or 323-581-5200
Email: info@alsacorp.com


Peel Off Paint Application Guide


Do not apply to a porous surface like raw wood,
old car paint, etc. Requires 30 days to fully cure.



SPECIAL NOTE: Peel Off Paint WILL NOT DRY PROPERLY BELOW 70°F
We recommend a temperature above 70° F
Can not be removed in cold. It needs at least 70° F to remove.

SPRAY CANS: We suggest that you use the entire contents of a can
once it is open. Apply spray using a continuous motion when
possible. Stop and go spraying will create dribbling at the tip.
Be sure to wipe the tip well after each application.

If your vehicle is an older model with lots of fall out, it is best to buff it with a rubbing compound.

Begin by washing the vehicle or part.

It is highly recommended that a small test area/panel be done prior to starting any project.


DO NOT CLEAN WITH ALCOHOL,
SOLVENT, or AMMONIA.


  1. Surface must be smooth and cleaned.
  2. Alsa Peel Off Paint is ready to use, mix well and strain Alsa Peel Off Paint before application.
  3. You will need a gravity gun with a 2.0 to 3.0 tip. If you don’t have such a tip you may water it down 5% to 10% with distilled water for better results.(additional coats may be required) Or Airless equipment may be used with a tip size # .011 or .019
  4. The ideal temperature to spray the product is at 70°F. It will not work in temperatures below 60°F.
  5. Apply a light tack coat of Base Peel Off Paint and let it flash off 15 minutes. Then follow it with 3 medium wet coats of Base, allowing 15 to 30 minute flash time in between coats. (Cooler temperature and humidity will prolong time in between coats).
  6. Apply 3 medium wet coats of Alsa Peel Off Paint Topcoat Color allowing 15 to 30 minutes flash time in between coats. (Cooler temperature and humidity will prolong time in between coats).
  7. Allow the finished product to dry for 24 hours. It will be dry to the touch within 3 to 4 hours.
  8. Clean up your equipment with water. (Warm water works better).
  9. For the first two to three weeks, wipe clean with a damp cloth.
  10. Do not use any household or automotive cleaners containing alcohol, solvent, or ammonia to clean the car or part.
  11. Allow a full 30 days for Peel Off Paint to cure. This will provide the resistance and adhesion required to prevent scrapes and scratches.
  12. Coating should be checked for adhesion every 2 months.

Peel Off Paint Removal Guide


  1. Ambient Temperature should be 70°F to 80°F.
  2. Start by removing the edges.
  3. Once you lift up the edge, try to make a film, and take it off in big sheets.
  4. If you feel that it is hard to remove you can use a hair dryer or heat gun to warm it up and release the film from the surface (be patient).
  5. After removing all Peel Off Paint, you can wash the car as you would normally do.
  6. If you leave Peel Off Paint on for over 6 months, and too much adhesion occurs, re-coat it again with Peel Off Paint and it will be ready to come off easily.


*Dealers please inquire.

BACK TO TOP OF PAGE