Basecoat for ChromeFX™ Description: The ChromeFX™ (US Pat. #4,975,305) Basecoat is a solvent based, 2-component spray applied coating that forms a smooth reactive base for the ChromeFX™ (US Pat. #4,975,305) Intermediate “chrome” layer.  It can be used without additional primer on most non-porous surfaces. Product Data: Pigment / Binder:  Acrylic resin Solvents: Aromatic hydrocarbons Fire Hazard: Flammable Flash point: 27° C or 80°F Coverage: 400 sq. Ft/ gallon @ 1 mil Substrates: Plastic or metal Color: White Shelf Life: 1 Year Unopened Pot Life: 4 Hours @ ambient conditions. Product Data: Pigment / Binder:  Acrylic resin Solvents: Aromatic hydrocarbons Fire Hazard: Flammable Flash point: 27° C or 80°F Coverage: 400 sq. Ft/ gallon @ 1 mil Substrates: Plastic or metal Color: White Shelf Life: 1 Year Unopened Pot Life: 4 Hours @ ambient conditions. Application: Cleaning: All parts must be chemically or mechanically cleaned, film free, by a recognized cleaning specification. Pre-treatment: Plastics: Use adhesion promoter recommended by substrate manufacturer to improve adhesion. Porous Surfaces: Apply a primer/sealer. Inquire about ChromeFX™ water based primer for Styrofoam and other porous plastics. Hardener: ChromeFX™ Hardener H67 Mixing ratio by volume: Basecoat - 4 Parts / Hardener - 1 Part Application Methods: Conventional or HVLP spray Recommended dry film thickness: 1.0 mil DO NOT TOUCH PART AFTER PRODUCT APPLICATION.  Hand oils cause defects in intermediate coat. Drying: Air Dry: 48 hours Forced Drying: 1 hour at 50°C (130°F). Metals and high temperature plastics can use higher temperatures. Storage: Store at ambient conditions and away from open flame. Safety Precautions: Please refer to the Material Safety Data Sheet